Furuno - FM8500 & DSC6A (Clear Ram/Rom/all no need press switch inside
642111
Furuno - FM8800 MMSI & Output power
Jumper between #2 and #15 printer port. Turn on unit press [menu] system [ent] press 652111 [ent
Furuno - DSC 60
652111 [enter]
Furuno - BR-510
up, right, down, left, ENT/CALL, MENU/ESC
Furuno - FS1562
1562
Furuno - FS1570
Switch ON unit and press switch on CPU board an the screen menu appears press:652111 ent.
Furuno - DP5/6
"lockkey" DP5 "[enter]"
Furuno - DP5/6
Press F5: station, option 5: capslock on and type: ANSWER CODE
Furuno - DP5/6
ID code
Furuno - Felcom 15
Job: furunoservice password: felcom15
Furuno - Felcom 15 clear RAM & IMN
Job: clr ram IMN [ALT +IMN]
Furuno - Felcom 15 and 16 SSAS default
SSAS manager / ship security alert
Furuno - Felcom 15 and 16 if SSAS manager mode cannot be unlocked due to invalid password use:
wasuremashita+IMN
Furuno - Felcom 80 telex a/b
ANSWER
Furuno - Felcom 80 change tel/fax numbers and setting
Switch on at CPU 2 SW2-2
Furuno - Felcom 81 change tel/fax numbers and setting
Job: FURUNOSERVICE; password: felcom81
Furuno - Felcom 81 clear ram
Job: CLR RAM password: 3504
Furuno - Felcom 81 manual control
Job: FURUNOMANUAL; password: 3504
Furuno - Felcom 82 Clear RAM
Job: CLR RAM password: denpa4
Furuno - Felcom 82 furuno service
Job: FURUNOSERVICE; password: felcom82
Furuno - FA-50
Read manual to connect by LAN and web-interface. Logins needed for : INITIAL_SETTINGS : user : furunoservice p/w : fa50 SERVICE_MODE : user : service p/w : 652111
set hook sw valid/invalid (valid means CH16 when handset in cradle): press
JRC - JUE-85/95
to reset SSAS password to default “0000” use the password “8595”
JRC - JLN-205
to enter service menu: when start up screen, press for 2 sec
JRC - JMA-5300/7100/9100 MKI+II
Fishing boat mode: press
Simrad - Simrad/Koden Radar
For extended settings, press mode while powering on. This reveals settings as tuning.
JRC - JHS-182
Checking of SW level. When standing on menu ”sw version” press DIM/PWR while pressing enter. Then extended SW level is shown.
Comnav - Voyager X3
Passwd: 00000000 (8x0) If that doesn't work, you can change passwd by entering something like gl passwd in change passwd and then 00000000 again
Sailor - RT6222
Password for MMSI change : 12345. For further setup, like private channels and also MMSI, go to the menu of the radio to find the radios IP address. Connect LAN,
Sailor - TT-3000
Login as system administrator password sysadm or tt3000ssa
Use Easy-track or Hyperterminal 4800 baud. TEST= press and hold green button, then press Alert bu
Furuno - Felcom 15
Live test is done by activating SSAS button. After 10 min, alarm can be cancelled, by pushing button 5 times within 3 seconds, leaving the button unlatched. In ca
Furuno - Felcom 16
Live test is done by activating SSAS button. After 10 min, alarm can be cancelled, by pushing button 5 times within 3 seconds, leaving the button unlatched. In ca
JRC - JAN-901M/B
Enter windows – 85101
Check SW – 85100
Service menu – 8510
Sailor - Sat-C
If password is unknown, you have to request for the distributor password at: https://sync.cobham.com/satcom/
Login details: user: hr@navteam.com password: Navte
TRANSAS - NAVI4000
Clone display to have output to VDR or slave display via the DVI-port of the ECDIS:
1) close ECDIS program (select CONFIG and click exit)
2) open SERVICE TOOLS
Sailor - 628x
AIS passwords:
User level: user Admin level: sailorsailor Factory reset: 12345
JRC - JMR-92xx
(MFD radar general) – In case you get chart database error, use password 5739 in task menu code input to delete charts.